API-D Double-Side Ribbed Rubber Pad 

Acrefine API-D type rubber pad is designed to minimize vibration and noise transmission from floor mounted equipment.

API-D incorporates a double-sided ribbed design which prevents slippage in all directions. Pads are manufactured in 450×450 mm (18×18”) sheets that can be cut to required sizes.

The standard thickness of the pad is 14 mm (1/2”)

  • Ribbed surfaces prevent slippage in both directions
  • Can be cut to any size required
  • Can be stacked with steel plates to achieve high deflection
  • 14 mm (1/2”) thickness
  • Designed for 380 kPa (55 psi)

Acrefine API-D type vibration isolators are suitable for floor mounted mechanical equipment that generates high frequency vibration, i.e., pumps, chillers, compressors, centrifugal fans, blower-coil units, vent sets, low pressure packaged air-handling units, etc.

API-D type vibration isolation pads are available with up to 2.8 mm (1/8″) deflection at 380 kPa (55 psi). If higher deflections are required, the pads can be stacked with steel plates between layers.

You must first sign in or register to gain access to Acrefine downloads.

Here you will find product brochures, technical specification documents, installation guides and much more.