Spring Isolators with Top Plate
Acrefine ASI-L type seismic vibration isolator is designed to restrain lateral and vertical equipment movement caused by external forces such as high winds or seismic events. The isolator housing is fabricated from high quality welded steel. This design incorporates restraining points that limit vertical and lateral movement of the equipment.
The operational height of the isolator is fixed, and any adjustment can be made via the adjustment nut located on top of the spring plate. Fixing holes are provided on the top plate for easy installation of equipment. Vibration isolation is achieved by free-standing laterally stable steel springs. All springs are assembled into elastomeric acoustical cups to eliminate internal noise. Springs are designed with 50% overload capacity and the lateral spring stiffness is greater than the vertical stiffness to assure seismic stability.
- Can be bolted or welded in place
- Constant free and operational height
- All-directional restraint, limiting equipment motion to 6mm (1/4″)
- Field interchangeable, colour coded springs
- Powder coated housings and springs for superior corrosion protection, zinc plated fasteners
- Designed for loads up to 6,220 kg (13,716 Ib) with 25
mm (1”) or 50 mm (2”) deflection springs
Acrefine ASI-L type seismic vibration isolator is designed for floor mounted equipment such as cooling towers, chillers, boilers, etc. This isolator is ideally suited for applications where seismic or high wind forces are likely. Spring deflections of 50 mm (2″) provide excellent noise and vibration control.
ASI-L isolators are available 25 mm (1″) and 50 mm (2″) deflection as a standard. The load range is from 7 kg (15 lb) to 6,220 kg (13,716 lb). Higher deflection rates and load capacities are available upon request.