AH-OR Open Rubber Isolation Hanger
Acrefine AH-OR type rubber vibration isolation hanger is designed to minimize vibration and noise transmission from suspended equipment and services. The hangers can be mounted directly to equipment-carrying brackets. They offer a cost-effective solution for suspended equipment that generates noise and vibration.
Vibration isolation is achieved by rubber designed to be governed by the shear modulus. This allows for increased strain, and deterioration is minimized. Rubber elements are grouped by their ‘Shore A Hardness’ which corresponds to different load ranges. There are three groups, each colour coded for easy identification and to promote correct installation.
- Double deflection rubber
- Colour marked rubber elements for easy identification
- Max. deflection up to 13 mm (1/2″)
- Load capacity up to 540 kg (1,190 lb) on standard range
- Five groups; 30, 40, 50, 60, 70 Shore A Hardness
Acrefine AH-OR type vibration hanger is a cost-effective solution for minimizing vibration and noise from suspended mechanical equipment, i.e., in-line fans, exhaust fans, cabinet fans, etc. This hanger is also used on piping and ductwork which is in close proximity to mechanical equipment.
AH-OR type vibration hangers are available with up to 13 mm (1/2″) deflection as standard. The load range is from 25 kg (55 lb) to 540 kg (1,190 lb).