API-C Copolymer & Ribbed Rubber Pad

Acrefine API-C type combined copolymer and rubber pad is designed to minimize vibration and noise transmission from floor mounted equipment.

API-C incorporates a sandwiched design where special copolymer material is laid between two layers of rubber. The sandwiched copolymer with two layers of rubber forms a composite material. This special structure has elastomeric properties that outperform conventional materials such as cork and shredded rubber.

Pads are manufactured in large sheets that can be cut to required sizes. The standard thickness of the pad is 26 mm (1”)

  • Combined design incorporating rubber and composite
    material
  • Can be cut to any size required
  • Can be stacked with steel plates to achieve higher deflection
  • 26 mm (1”) thickness
  • Designed for 250 kPa (36 psi)

Acrefine API-C type vibration isolators are suitable for floor mounted mechanical equipment that generates high frequency vibration, i.e., pumps, chillers, compressors, centrifugal fans, blower-coil units, vent sets, low pressure packaged air-handling units, etc.

API-C type vibration isolation pads are available with up to 5.2 mm (7/32″) deflection at 250 kPa (36 psi). If higher deflections are required, the pads can be stacked with steel plates between layers.

You must first sign in or register to gain access to Acrefine downloads.

Here you will find product brochures, technical specification documents, installation guides and much more.