Welded Housing Spring Isolators
Acrefine ASI-S type seismic vibration isolator is designed to restrain lateral and vertical equipment movement caused by external forces such as high winds or seismic events. The isolator housing is fabricated from high quality welded steel. This design incorporates seismic steel bushing with elastic rubber to improve the performance. Equipment motion is limited to 6 mm (1/4″) which also ensures out-of-contact operation under normal conditions. The operational height of the isolator is fixed, and any adjustment can be made via the adjustment nut located under the equipment bracket.
Vibration isolation is achieved by free-standing laterally-stable steel springs. All springs are assembled into elastomeric acoustical cups to eliminate internal noise. Springs are designed with 50% overload capacity and the lateral spring stiffness is greater than the vertical stiffness to assure seismic stability.
- Can be bolted or welded in place
- Constant free and operational height
- All-directional restraint, limiting equipment motion to 6 mm (1/4″)
- Colour coded springs
- Powder coated housings and springs for superior corrosion protection, zinc plated fasteners
- Standard deflections include 25 mm (1″) and 50 mm (2″)
- Load capacity up to 1,550 kg (3,417 lb)
Acrefine ASI-S seismic vibration isolator is designed for floor mounted equipment. This isolator is ideally suited for applications where seismic or high wind forces are likely. Spring deflections of 50 mm (2″) provide excellent noise and vibration control.
ASI-S isolators are available with 25 mm (1″) and 50 mm (2″) deflection springs as standard. The load range is from 7 kg (15 lb) to 1,550 kg (3,417 lb). Higher deflection rates and load capacities are available upon request.