AS-B Height Adjustable Seismic Snubber

Acrefine AS-B type seismic snubber is designed to limit equipment motion in all directions caused by external forces such as seismic events. This snubber is suitable for equipment that have predrilled holes in their bases.

At least two snubbers must be installed opposite one another to limit equipment movement when subject to lateral and vertical forces from any direction.

AS-B type snubber is height adjustable and consist of two components. After the height is adjusted these components should be welded together. Impact surfaces on the snubber are protected by elastic rubber which reduces the shock loads and ensures improved performance.

  • All directional restraining
  • Hight adjustable
  • Cost and time saving
  • Can be bolted or welded in place
  • Easily inspected for correct installation alignment
  • 35 mm (1/4″) thick rubber cushion on impact surfaces
  • Powder coated for superior corrosion protection
  • Load capacity up to 900 kgf (1,984 lbf) on standard range

Acrefine AS-B type snubbers are designed for floor mounted equipment. They are suitable for applications where equipment is on resilient supports such as rubber or springs and thus all-directional restraining is required. When installed snubbers remain out of contact during normal operation. They are built to withstand seismic forces so that equipment can be held in place. These snubbers come in different sizes and up to 900 kgf (1,984 lbf) load capacity. Higher load capacities are available upon request.

You must first sign in or register to gain access to Acrefine downloads.

Here you will find product brochures, technical specification documents, installation guides and much more.